Pipe Bending Machine are the most commonly used equipment in the manufacturing industry, but many factory operators do not know how to maintain our pipe benders on a daily basis.
After reading this article, you will know how to treat our [pipe bender friends" well.
1.Clean the fan. The long-term use of the fan in the pipe bending machine will cause a lot of solid dust to accumulate in the fan, which will make the fan produce a lot of noise, and it is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke exhaust is not smooth, it is necessary to clean the fan.
2. Replacement of the circulating water of the pipe bender and cleaning of the water tank. Make sure that the laser tube is filled with circulating water before the tube bending machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to replace the circulating water and clean the water tank regularly. Do this once a week.
3.Lens cleaning. There will be some reflectors and focusing mirrors on the pipe bender. The laser is reflected and focused by these mirrors and emitted from the laser head. The lens is easily stained with dust or other pollutants, causing loss of laser or damage to the lens. Therefore, the lens should be cleaned every day. Attention should be paid while cleaning:
a. The lens should be wiped gently, and the surface coating should not be damaged;
b. The process of wiping should be handled with care to prevent falling;
c. When installing the focusing lens, please be sure to keep the concave side down.
4. Fastening of screws and couplings. After the motion system works for a period of time, the screws and couplings at the motion joints will loosen, which will affect the stability of the mechanical motion. Therefore, it is necessary to observe whether there is any abnormal sound or abnormal phenomenon in the transmission parts during the operation of the pipe bender, and to find out the problem. To be strengthened and maintained in time. At the same time, the pipe bender should use tools to tighten the screws one by one after a period of time. The first firming should be about a month after the device is used.
5. Guide rail cleaning. As one of the core components of the equipment, guide rails and linear shafts function as guides and supports. In order to ensure the high machining accuracy of the pipe bender, its guide rails and straight lines are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece. Based on the long-term deposition of a large amount of these smoke and dust on the surface of the guide rail and the linear shaft, it will have a great impact on the processing accuracy of the equipment and will Corrosion spots are formed on the surface of the linear axis of the guide rail, shortening the service life of the equipment. Therefore, clean the guide rails of the pipe bender every half a month. Turn off the bender before cleaning.
6.Light path inspection. The optical path system of the tube bending machine is completed by the reflection of the mirror and the focusing of the focusing mirror. In the optical path, the focusing mirror does not have the problem of shifting, but the three mirrors are fixed by mechanical parts, and the possibility of shifting is relatively small. Large, although usually there will be no offset, but it is recommended that users check whether the optical path is normal before each work.
